Suggestions

  • Your First Burn needs to be 2-3 hours in order to achieve full melting pool.  A full melting pool prevents tunneling, which is access wax build up on the side of your vessels.
  • Never leave a burning candle unattended.
  • Keep your candle out of reach of children and pets.
  • Never burn your candle near anything that can catch fire.
  • Be sure that you place your candle on a stable, heat resistant surface.
  • Keep lit candles away from any drafts.
  • Never burn your candle all the way down. Always leave 1/2 inch of wax in the bottom of the vessel.
  • Never touch or move a burning candle when the wax is liquid.
  • Place burning candles at least 4 inches apart from one another.
  • Never use water to extinguish our candle.
  • Candle tins will be extremely hot after each use and while candle is burning PLEASE avoid moving the candle around while it & allow time for candle cool down before touching the tin!
 
Do I need to trim my wicks? 
  • Yes, before each and every burn of your candle it is important to trim the wick. If your candle wick is too long it can cause smoking, and blacken the sides of your vessel.  We recommend a cut length of 1/4 inch using a wick trimmer. However, small household scissors or nail clippers work just fine. We recommend that you only cut the wick once the wax has cooled to avoid any wick trimmings in the wax. Having a wick that is too long will not only cause your candle to burn quicker and hotter, it could also prohibit your wick from even staying lit.

Can I reuse my candle vessel for something else? 

  • Yes you sure can! Just make sure you properly  clean it. See instructions below. 

How do I remove the excess wax to reuse the vessel?  

  • You can either pour boiling hot water into the vessel. Allow that to sit for a little while. Once it has cooled down, remove the wax that should have floated to the top. Clean the vessel with liquid dish soap and dry as normal. 
  • You can also boil water and place the vessel is to the water. The wax will then float to the top *You can reuse your wax if you do it this way in a wax warmer* Then you want to be careful when removing the vessel. Allow the water to cool down. Proceeds to wash out the vessel with liquid dish soap and dry as normal.